IP67 LED Floodlight Drive Features

    Building Flood Light IP67 device is a series of LED lamps, ideal for up-lighting or down lighting applications. At the same time, also applies to building facades, buildings, bridges and architectural lighting. The lamp is made of anodized aluminum CNC machining, and the use of LED. This kind of building fixture does have a variety of uses and powerful. Even if the lamp is placed in the harshest environment, the glass diffuser ensures that the fixture plays a strong role. The lamp has a warranty period of 3 years, LED's long service life (over 100,000 hours), and energy consumption is very low, these features make it the best choice for you. The product is designed and produced by Romanian.

    Operating temperature: -40 -80 ℃ (outer surface temperature of the enclosure) Storage temperature: -40 -85 ℃ Humidity: 10-90% Relative humidity Average life expectancy: MTBF 50,000 hours Safety: UL 60950, EN61347 Electromagnetic interference: CISPR15; FCC 47CFR-Part15B Features:IP67 LED Flood Driver

1. High reliability, especially as LED lights drive power, installed at high altitude, maintenance is not convenient, maintenance costs are also large IP67 LED Flood Driver2. High efficiency LED is energy efficient products, drive power efficiency is higher. It is especially important for the power supply to be placed in the fixture. Because LED luminous efficiency with the LED temperature increases and decreased, so the LED heat is very important. Power efficiency is high, its power consumption is small, in the lamp heat is small, it will reduce the lamp temperature. To delay the LED light failure beneficial.3. High power factor power factor is the load on the grid requirements. Generally less than 70 watts of electrical appliances, there is no mandatory indicators. Although the power is not a single power factor low power on the power of the little impact, but at night we light, similar load is too concentrated, will produce more serious pollution of the grid. For 30 watts to 40 watts of LED drive power, it is said that in the near future, may have a certain degree of power factor requirements.IP67 LED Flood Driver IP67 LED Flood Driver4. There are two ways to drive now: one is a constant pressure source for multiple constant current sources, each constant current source to each LED power supply. This way, the combination of flexible, all the way LED failure, does not affect the work of other LED, but the cost will be slightly higher. The other is a direct constant current power supply, LED series or parallel operation. Its advantage is a little lower cost, but the flexibility is poor, but also to solve an LED failure, does not affect the other LED operation problems. These two forms coexist for a period of time. Multi-channel constant current output power supply, in terms of cost and performance will be better. Perhaps the future direction of the mainstream.5. Surge protection LED anti-surge capability is relatively poor, especially anti-reverse voltage capability. It is also important to strengthen this protection. Some LED lights installed in the outdoors, such as LED lights. Due to the load of the grid load and lightning induction, from the grid system will invade a variety of surges, and some surge will lead to LED damage. So the LED drive power to suppress the surge of intrusion, the protection of LED is not damaged capacity.6. Protection function In addition to the conventional protection function, it is best to increase the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.7. Protection aspects of lighting outside the installation type, the power structure to waterproof, moisture, the shell to light.8. The life of the drive power supply is compatible with the life of the LED.IP67 LED Flood Driver9. To meet the requirements of safety and electromagnetic compatibility.

With the growing popularity of LED, LED drive power performance will be more and more suitable for LED requirements.