100W IP67 Round Driver

Product Details

If you are planning to buy high-quality CE certification 100W ip67 round driver at low price from one of the professional China led round shape driver, meanwell hbg driver, waterproof round driver, 100w meanwell round driver, ufo round size driver manufacturers, please feel free to contact Zhihe Xingye Electronics Co.,Ltd.

100W 36V Constant Voltage LED Driver ZH-HBG-100 Waterproof IP67 Round Shape SMPS
Features:
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Protections: Short circuit /Over current /Over voltage /Over temperature
OCP point adjustable through Output Cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Suitable for dry / damp / wet locations
3 years warranty, Tc70℃ 40000hrs
Model Series:
ZH-HBG-100-24() / HBG-100-36() / HBG-100-48() /HBG-100-60()
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output constant current level can be adjusted through internal potentiometer.
B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance
E(option) : IP67 rated. Can be fixed by steel support.

Detailes:

Model		HBG-100H-24	HBG-100H-30	HBG-100H-36	HBG-100H-42	HBG-100H-48	HBG-100H-54	Non-standard type
Output	DC voltage	24V	30V	36V	42V	48V	54V	55-220V
	Rated current	4.0A	3.35A	3A	2.2A	2.1A	1.9A	0.5-2.4A
	Rated power	100W	100.5W	108W	92.4W	108W	102.6W	100W
	Ripple&Noise	150mVp-p	150mVp-p	200mVp-p	200mVp-p	200mVp-p	200mVp-p	MAX 500mVp-p
	Output voltage	18-24V	20-30V	26-36V	30-42V	36-48V	42-54V	Customized
	Output current	Can be adjusted by internal potentiometer（Only A）
	Output current	2-4A	1.2-2.5A	1-3.1 A	1-2.4A	1-2.2A	1-2 A	Customized
	Voltage tolerance	1%	1%	1%	1%	1%	1%	1%
	Line Regulation	0.50%	0.50%	0.50%	0.50%	0.50%	0.50%	1%
	Load Regulation	0.50%	0.50%	0.50%	0.50%	0.50%	0.50%	1%
	Starting Time	2500ms，50ms（@full load）230VAC/115AC; B model：2500ms，200ms（@full load）230VAC/115AC;
	Hold-up Time（Typ）	10ms@full load 230VAC/115VAC
Input	Input voltage	100-277VAC OR 130-420VDC
	Frequency range	47-63HZ
	Power Factor（Typ）	PF>0.98 115VAC, PF>95 230VAC, PF>0.93VAC 277VAC @full load
	Efficiency（Typ）	>88%	>88%	>89%	>89%	>90%	>90%	>90%
	AC current（Typ）	1.4A/115VAC, 0.6A/230VAC ， 0.55A/277VAC
	Input inrush current（Typ）	(cold start)<50A /230VAC
	Leakage Current	<0.75MA/277VAC
Protection	Output Over-current protection	OCP point95-105%
	Output Over-current protection	When the output current is over,Return to normal status when output limit current to get right.
	Short Circuit Protection	The input power shall decrease when the output rail short,the power supply shall no damage,and shall be self-recovery when the fault condition is removed
	Over Voltage	28-34V	34-40V	42-50V	48-56V	54-64V	60-67V	Customized
	Over Voltage	When the output voltage is over, the products is protected such as hiccup or when it is at the highest point of output voltage the product would not be hurt when the fault is excluded or is start working again.
	Over Temperature	85℃±10℃，start
	Over Temperature	85℃ automatic recovery，Derating Mode .When temp reach 95℃,The Max current will decline 40%
Environment	Operating Temperature	-40---+70℃
	Relative operation Humidity	20-95%RH
	Relative Storage Humidity	-40-+80℃，10-95%RH
	Max temperature Rise	+30℃ Without wind open environment, the highest temperature of the shell.
	Vibration	10-500HZ,5G 12minutes per cycle for each axis(X,Y,Z)
Safety Standards&EMC	Safety Standards	EN 61347-1：2008+A1：2011+A2：2013 , EN 61347-2-13：2006 , EN 62493：2010
	Dielectric Strength(Hi-pot)	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	Insulation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70%RH
	EMC Emission	EN55015，EN55022(CISPR22),Class B,EN61000-3-2 ：2006+AA:2009 (≥70%@ full load)
	EMC immunity	EN55024-A , EN61000-3-3：2013
Others	MTBF	≥150Khrs MIL-HDBK-218F(25℃)
	Size	130mm*66.5mm
	Package	carton
Note	All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation and load regulation.
	4.Constant current operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
	5.Derating may be needed under low input voltages. Please check the static characteristics for more details.
	6. Length of set up time is measured at cold first start. Turing ON/OFF power supply may lead to increase of the set up time.
	7.The power supply is considered as a component that will be operated in combination with final equipment.Since EMC performance will be affected by the complete installation,the final equipment manufacturers must re-quality EMC Directive on the complete installation again.
	8.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently.

Size:(mm)

Blank:(ZH-HBG-100H)

图片1.png

图片2.png

Certifications

Package

Feedback